Description
The Polaris has a high grade
444 stainless steel tank with
brass connections for years
of dependable, trouble-free
service - no anode required.
A submerged combustion
chamber with spiral flue
provides up to 96% thermal
efficiency and ultra-low
standby heat loss of
approximately 1%.
•10-year limited Tank
warranty, 1-year parts
warranty for Residential
applications
•96% Thermal Efficiency
•199,000 Natural Gas BTU
Input per hour
•Sealed Combustion with Woven
Fiber Premix Burner - Metal
fiber burner is designed for
clean combustion in
high-intensity blue flame
mode. Manufactured of
refactory steel that resists
corrosion. Excellent
resistance to thermal and
mechanical shock, even at
extreme temperatures. Uniform
combustion provides excellent
heat transfer. Meets Low NOx
requirements for California
and Texas.
•Whisper Quiet Operation -
Ultra quiet blower and burner
minimize noise. Requires 120
volt 60Hz power supply. Draws
less than 5 Amps.
•Power/Direct Vent Using 2”
or 3” Plastic Pipe - Direct
vents up to 120’ using PVC,
CPVC, or ABS pipe either
Thru-the-Wall or
Thru-the-Roof. Optional
concentric vent kit available
for use Thru-the-Roof or Wall.
•“Plug-and-Play” Technology -
No special adjustments are
required at initial start up.
Connect air inlet, exhaust
outlet, water, electricity,
and gas, set the temperature
and the system functions
properly
•Self-Diagnostic Control
System - Three external LED
lights indicate operational
status of water heater.
Microprocessor monitors nine
critical functions. An LED
troubleshooting light,
visible through view port,
signals heater operation
status.
•Full Serviceability from the
Front - Removal of two
front-located access panels
exposes all serviceable
components. Modular
components are easily removed.
•Other Features : •-
Thermistor Temperature Sensor
•- 24-Volt Thermostat Control
•- Hot Surface Ignition
•- Full Flow Brass Drain Valve
•- Zero Clearance to
Combustibles
•- CSA Certified and ASME
Rated T&P Relief Valve
•- Factory Provided
Condensate Trap
•- Multiple 1” Brass Tank
Connections
•- Factory Provided Tempering
Valve
•Certified to ANSI
Z21.10.3-CSA 4.3 standards
and meets or exceeds
ASHRAE/IESNA 90.1-current
edition.